Abstract of the product range of testing tables
Electromechanical vibration systems for reliability and fatigue testing as well as transport simulation.
Test vibration tables / Test vibration tables for material testing, material testing, transport simulation
The electromechanical vibration system MINI for small loads and for a small price.
As part of the world wide used VIBROTEST - program the series VM has been developed for mobile use and is the ideal partner in the field of small device production.
The electromechanical vibration system for medium load and with an attractive price.
The series VE was developed for the use in the electronic industries and is nowadays in use in all areas where economic testing of medium loads is needed.
The electromechanical vibration system for increased load and general applications.
The series VS was developed for general applications in the industries and is nowadays in multifarious use.
The electromechanical vibration system for high load up to palette size.
The series VA has been developed for applications in the field of high loads and is nowadays used especially for transportation simulation.
The series 4W has been developed for applications where the test parameter as frequency and accelerating strain of the test specimen has to be regulated very accurately (e.g. the automobile industry).
This can be guaranteed due to the 4-shaft-technology. The amplitude during operation can be adjusted between 0 and 100 %. With the corresponding feed-back of the test specimen (e.g. with the help of the VIBROCONTROL measuring equipment) the test parameter can be adjusted very precisely.
For the testing of critical components under corrosion conditions the series 4 W has been extended by this model.
The test sample can be covered by a special stainless steel hood, which is waterproof connected to the table surface by an expansion bellows.
VIBROTEST – 4W- HXY
For the testing of specimen under horizontal load. The direction of motion ( X or Y) can be pre-selected by a switch. The amplitude can be adjusted electrically, as is the case with all tables of this series.
|- horizontal sinusoidal motion in X- an Y-direction|
|- acceleration:||0 - 10 G|
|- frequency range:||10 - 50 Hz|
|- max. load:||300 kg|
|- clamping surface:||1200 x 800 mm|
|- working level:||700 mm|
|- suspension:||by pendulum|